This is a compact beginner work station to wash, mix, press, create ingots, create andesite alloy and shafts, etc. The depot under the press can be rotated to a basin and back again allowing for pressing sheets and ingot pressing from nuggets (be sure to use the filter to make sure the contents don't spill into the chute). The toolbox acts as a filter for the washer and the funnel above the mechanical saw can be flipped to empty the contents of the chest for processing on the saw or to hold the contents in as a place to store materials. You will need to add the water above the fan. I have a river next to the fan and used it as a water source, so add the water and block it off. I placed a block on the saw when I was using the mixer and didn't want the contents to be processed on the saw. I did not include the power source. I used 6 large water wheels to supply the power from a river that is next to the work station, but you could use windmills or steam if you wanted to. Next step was to add a blaze burner under the mixer for brass production. I did not add that in the schematic since it is not a early game resource. I hope this helps you all out.