Mechanical Saw

Uberswe's Farwater Workshop

This is the workshop I build on Farwater Interstellar (Season 9)

Kuha's Create: 30 Day Building Challenge - Starter House

First day of the 30 day building challenge, today with the starter house!

TrainFactory + Trainstation #30daycreatemodchallenge

This is a 35x35 Tainfactory that can produce train tracks and sturdy sheets. the train-tracks are completely automated but the sturdy sheets aren't, u need to put magma blocks in a chest made fir them because its not possible to automate magma blocks with create BUT if you downloaded an addon for that u can still hook up your 2 farms thanks to the train track going thru the factory. Those traintracks going thru can be used for a lot of thingy like just using it as a station or use it to deposit materials and take materials at the farm with automated trains (highly recommend that). I also tryed to make the inside look good. so enjoy :D

Nether Tree Farm

Nether Tree Farm that I designed! Check it out on Youtube for more details!

All-In-One Workstation [Early Game]

A workstation for all of your survival needs!

Create Mod Starter House

This is a Create Mod starter house which is perfect to use as a nice base for your world. It is something I never used in a video so I am sharing it here for anyone to use but please give credit.

Basic starter base

This is a two story starter base for the create mod, it is equipped with a washing, smoking, and blasting station, user friendly mixer, and a press, saw, deployer, and crushing wheels.

30 Day Build Challenge- Tree Farm- Elemental Paladin

To start the farm, put any sapling into the chest above the portable storage interface and flick the lever next to the cart assembler. The farm will then grow and cut the trees naturally and sort them into chests based on wood and sapling type. When you want to switch sapling of the farm, flick the lever on the block with a redstone torch and press the button near the chests. Wait a few minutes for the minecart contraption to run out of saplings, then press the button, flick the lever again, and put in the new saplings.

Quad Casing Creator

This is my Casing Crafting Device, made to automatically craft each of the 4 different casing types. Crafting these by hand can quickly become a chore and a delay to do what you want to do, well, no more. Just set this up and you will be building what you want, when you want.

Simply Complicated Dark Oak Tree Farm

This is my dark oak tree farm I created for my simply complicated tree farms video. Keep in mind that the rotation might change when importing so you have to make sure that you are rotating all the shafts in the same direction as I do otherwise you will get weird behaviors. Check the video to compare my setup with yours. You will also need to add water so that dirt blocks can be turned into grass blocks.

biomass/biomass pellet farm ~6K SU

this is a dual purpose farm i decided to make it will probably be a bit slow at the start but it does work, you will have to turn it on after making it since to make the schematic i turned on the clutch next to the left item vault, you will also need to power the blaze burner atleast once to kick it on but once you get enough biomass pellets it should turn off the funnel and kick it into making normal biomass and when it gets too low on pellets it should start making pellets again

Advanced Rotating Simply Complicated Tree Farm

This is the advanced version of the simply complicated tree farms I made. Keep in mind that the rotation might change when importing so you have to make sure that you are rotating all the shafts in the same direction as I do otherwise you will get weird behaviors. Check the video to compare my setup with yours. Guybrush had the original idea for this farm, make sure to subscribe to him on YouTube! https://www.youtube.com/@aRandomDudeDRS

Starter House - 30 Day Challenge

This is a starter house I built for my 30 day Create mod build challenge. This house uses very basic materials to make it more accessible and avoids any use of brass to make it more beginner friendly. It only uses Create, no other mods are needed.

LunarAntic's Spacious Facility

A huge base with an underground workshop. You're going to have to dig out the dirt when this schematic gets placed underground. Also go for Creative Motors to power everything

Decka's 30 Day Challenge Tree farm

TREE FARM AND BONEMEAL MAKER

Simple Cow Farm

Simple Cow Farm. Feed the deployer with wheat

Starter Workshop Base

This is the basic setup for a starter workshop that includes all the contraptions you need to get started with Create. Please note - This build does not include a power setup. The bulk blasting/washing/smoking/haunting setup needs to be run at 4 RPM, while the rest can be ran at any speed.

30 Day Build Challenge- Starter House- Elemental Paladin

Create Machines inside: Small Bread Maker, Wheat Harvester, Rotating wall (Door to the machinery room), Smoker, Blaster, Haunter, Washer, Manual Powered Basic Machines Notes: You need at least 3 brass funnels because they have filters, other than that you need 0 brass though if you don't want them. The brass is used to make the rotating wall spin and automate the collection of wheat (all it needs is a button press per wheat harvesting). You can also leave out all of the workbenches (and lodestone) and redecorate the main room as you like. The Lodestone is also only there in case you want to bind a compass to it, and is 100% not needed

Dual Train Track Tunneling Machine

This contraption lays dual train track while making a tunnel which can be used pretty much anywhere. I used this to make long underwater tunnels on my server and spent a lot of time testing this to make sure that nothing (except fish) can stop this machine. You will want to provide a starting supply of cobblestone which it uses to build the walls of the tunnel.

Basic Simply Complicated Tree Farm

This is the most basic of the simply complicated tree farms I made. Keep in mind that the rotation might change when importing so you have to make sure that you are rotating all the shafts in the same direction as I do otherwise you will get weird behaviors. Check the video to compare my setup with yours.

create:mechanical_saw

Schematics that use this block: