Glowstone

Windmill #30daycreatemodchallenge

This windmill is part of the 30 day create mod build challenge. It is also part of my raised city project, where builds in the challenge will stack together to form a city (thats why there are notches in this build). Setup instructions: 1. Right click all the windmill bearings 2. Place water next to the light blue concrete

Wizard Tower Iron Farm #30daybuildchallenge

Part of the 30 day build challenge series. This iron farm is decently fast and does around 2.5k ingots/hour. How to setup: 1. On top of the red concrete blocks place lava 2. On top of the blue concrete blocks place water 3. Waterlog the leaves 4. Waterlog the stairs on top of the cobble gens 5. Provide power at the lowest clutch near the stairs (inside cube) (Reposted because the last schematic was broken) I tried some new things this time, including using stairs for texturing, a new roof design (for the tower), and my first time ever using a "pallet", and (I have no idea how i've never done this before) an item indicator (shows the fill level of containers). This iron farm is pretty configurable and has can turn itself on and off as needed, it also features a display panel that shows iron farm information. You can also remotely force shutdown parts of the farm if needed. Shaders: Complementary Reimagined, Rethinking Voxels (hopefully I don't mess it up this time)

The Televator #30daycreatemodchallenge

The Televator is like an elevator, but instead of going up and down, it teleports you up. The Televator is one way, and only goes up, to get down just jump down the water. The Televator is just a proof of concept so it is buggy. ***Please Read the Setup Instructions even if your are pasting it in creative mod*** Setup: 1. Provide SU to the creative motor spots (256 RPM NEEDED) 2. Make sure every bearing is set to "Never Place" 3. Make sure the valve handles are set to 1° then turn them 4. Go to the back an ensure the elevator looks like a text cursor (thin in the middle, thick at the top and bottom) You can change the orientation by flicking the levers above the target blocks. 5. Put water at the bottom of the elevator so you don't die (there are dedicated notches for water) 6. On the bottom floor redstone room, flick the lever on then off quickly to start the clock. Troubleshooting: If it doesn't work then right click all the bearings (yes every one of them) when they are in down mode (not in a single file line). Then go through the setup instructions again. You may need to do this multiple times. If Uberswe doesn't describe a few things right I may make a separate video because all this can be confusing.

Polish cow

Polish dancing cow with note blocks!

Bee Inc. Honey Farm

This was a honey farm that I created on my Create mod SMP originally called "Tech Server" and later referred to as "Cogs & Trains SMP". It produces both honey and honey combs automatically and features a honey fall in the middle. Trains can pick up both honey and honey combs at the bottom.

Storage System #30daybuildchallenge

Do you want a storage system with a bunch of features that are actually useful? Do you want a storage system with bulk item capabilities, a terminal, and bulk item inputs and outputs? Then this schematic is for you! Part of the raised tower city project. Setup Instructions: 1. Right Click the windmill bearing on the bottom floor 2. VERY CAREFULLY replace the vaults, you don't want to lost the redstone links 3. On the top level, left 4 depots, put in cobblestone, cobbled deepslate, iron, and an oak log (1 of each) 4. Rename an oak plank to "Currently Unresponsive" and put it in the left depot 5. Put the minecart assembler to "lock rotation" 6. Flick the lever under the minecart assembler

Lighthouse

This is a Create Mod Lighthouse I built on my community SMP. It features a rotating light at the top, a large spinning wheel in the middle and a moving crane. You will need to add water to the water wheels to power the different areas. See my videos on where to click to make things move.

The Grand Tour

I built this train for a tour of my Create Mod Server where I traveled over 10000 blocks by train.

Iron Factory with Train pickup

My Iron Factory To get it running: add pipes to the water inlet running into a lake (no hose pulley, just dip the pipe in) Waterlog the pumps in the cobblestone generator and fill each 2x2 tank with 4 buckets (4000mb) of water. You can modify the train station to fit your trains size.

4 Track Train Station

This was done as a commission for me by a builder name Everlipse. It features 4 different tracks where trains can enter and leave to pickup goods and passengers. There is no functionality for loading or unloading goods, it is only decorative.

Brutalist tower

Saw someone make this a long time ago and the idea stuck in my head and wanted to try and turn it into my first schematicannon build ^-^

30DayChallenge IronFarm

#30DayChallenge

Beginner Elevator

This is a beginner elevator I made in Uberswe labs, the entire room shown in the video is included as an example to learn from.

minecraft:glowstone

Schematics that use this block: