Windmill Bearing

Full Video: https://youtu.be/jFqWbS4ONJ4 Day 4 of the Create: 30 Day Building Challenge, today, we're working on the bread factory with a friend of mine!

This windmill is part of the 30 day create mod build challenge. It is also part of my raised city project, where builds in the challenge will stack together to form a city (thats why there are notches in this build). Setup instructions: 1. Right click all the windmill bearings 2. Place water next to the light blue concrete

I remixed a windmill for the Create mod. has the maximum number of sails and good amount of inside space for starter base. Original windmill: https://youtu.be/rfTAzkL36nY?si=KmpiVCH2J02hPCIJ

This is a room I built for the "100 things you can do with the create mod" video that I made. One side features a train that can load lava and the other side features a bucket refill area that throws buckets through the nether portal.

Simple and adorable Blaze Farm using the Minecraft Create Mod. Farm The farm is yielding an impressive 1,000 Blaze Rods/Hr with 1 spawner. Footprint of it is 11x17x14. Farm is functional as is on SMPs

My Trainstation for the Uberswe 30 day challenge. It is built in the JcWnnr '23 to '24 style. It comes with automatic doors that open and close as the sun comes up and goes down as well as automatic lights. There are alternate ways to get to the tracks when the station is closed. There is also a perfectly integrated sign that has all shafts and gears hidden. You can have it say whatever you like! Enjoy!

Do you want a storage system with a bunch of features that are actually useful? Do you want a storage system with bulk item capabilities, a terminal, and bulk item inputs and outputs? Then this schematic is for you! Part of the raised tower city project. Setup Instructions: 1. Right Click the windmill bearing on the bottom floor 2. VERY CAREFULLY replace the vaults, you don't want to lost the redstone links 3. On the top level, left 4 depots, put in cobblestone, cobbled deepslate, iron, and an oak log (1 of each) 4. Rename an oak plank to "Currently Unresponsive" and put it in the left depot 5. Put the minecart assembler to "lock rotation" 6. Flick the lever under the minecart assembler

Starting off with the first day is of course a steam engine room, how else will we make power for all our factories? Maybe unlike other people doing this challenge, I will be focusing not aesthetics, but instead power (so quantity>quality) although the steam engine room is decorated. (there isn't much to a good steam engine room, so I decorated it this time to make it look a tad bit better) *Note 2: Building output is in the back* How to setup: #1 right click the windmill bearings to turn them on. Notice that when turning both of them on, the stress caps at 100% (perfectly stressed) [the wind turbines are in there own sealed off room] #2 Add water into the infinite water source holes (also inside it's own dedicated sealed off room) #3 add lava above the dripstone cauldrons #4 add buckets onto the top depots of the lava bucket filling setups If you are using this for the competition, use the 25x25_actual schematic (different post) Please use the other post of this if you ARE using this for the competition

This is my design of an airship design that I use as base on the uberswe community server. The schematic has no interior so you are free to design it as you wish. The design is heavily inspired by Dr.Lukin's Steampunk Airship.

This is a Create Mod Lighthouse I built on my community SMP. It features a rotating light at the top, a large spinning wheel in the middle and a moving crane. You will need to add water to the water wheels to power the different areas. See my videos on where to click to make things move.

31L x 11W x 12H Smoker. ------ Mods Used: -Create -Uppers -Storage Drawers ------- Targeted Speeds in RPMs 1) 225 Counter 2) 192 Clockwise 3) 64 Counter 4) 128 Counter ------- Two input double chests that feed up to side belts. The items make their way towards a single belt that randomly splits items using brass tunnels onto belted chutes. The cooked items funneled their way onto "Drawer Slave Controllers" connected to the storage drawers using "trim."

This is a Create Mod windmill that I build as part of my 30 day create mod build challenge. It only uses Create, no other mods are required. It also produces bread if the lever at the top of the farm is activated. Modpack: https://modrinth.com/modpack/create-30-day-build-challenge/moderation

All the instructions are in the video!

This is day 3,4 and 5 of the 30 day build challenge! I decided to build a Windmill design with a storage system and elevator inside. The storage system fully works without any need to be powered. You can add filters to the funnels for the items to be sorted. Right click both the windmill bearing and elevator pulley with an empty hand to activate. Hope you like it! :D

This was the smaller airship featured in my video: https://youtu.be/dC86cro_O7I

This is my storage system building made for the Uberswe 30 day challenge. It is in the JcWnnr '23 to '24 style. I left the sorting up to the person using the schematic. The filters are the most complex part of the system and they are not that hard. The sorting is done by the smart chutes. Set the items that will go into the chests directly below the smart chute on the filter. Then on the brass funnel for the chest set the specific item on the brass funnel's filter. You can use the list filter supplied, or just use the built in filter on the brass funnel itself. That's it. The items will fall down and go into the chests. There is an inventory input depot at each corner of the system. Overflow could become an issue if you have many many items for one chest, but a trash system could be added if you wanted. If you wanted to scale up the system you can just add more chests on the corners of the system and add more belts and shafts to expand it out. this system is fit in the 25x25 grid for the 30 day challenge. Hope you have fun!

Starting off with the first day is of course a steam engine room, how else will we make power for all our factories? Maybe unlike other people doing this challenge, I will be focusing not aesthetics, but instead power (so quantity>quality) although the steam engine room is decorated. (there isn't much to a good steam engine room, so I decorated it this time to make it look a tad bit better)*Note: the roof did get cut off to fit in the 25x25 margins* *Note 2: Building output is in the back* How to setup: #1 right click the windmill bearings to turn them on. Notice that when turning both of them on, the stress caps at 100% (perfectly stressed) [the wind turbines are in there own sealed off room] #2 Add water into the infinite water source holes (also inside it's own dedicated sealed off room) #3 add lava above the dripstone cauldrons #4 add buckets onto the top depots of the lava bucket filling setups If you are using this for the competition, use the 25x25_actual schematic Please use the other post of this if you are not using this for the competition

30 day build challenge made and iron farm with elevator as well as an elevator to use to get down to your mine levels for more resources!

Create Machines inside: Small Bread Maker, Wheat Harvester, Rotating wall (Door to the machinery room), Smoker, Blaster, Haunter, Washer, Manual Powered Basic Machines Notes: You need at least 3 brass funnels because they have filters, other than that you need 0 brass though if you don't want them. The brass is used to make the rotating wall spin and automate the collection of wheat (all it needs is a button press per wheat harvesting). You can also leave out all of the workbenches (and lodestone) and redecorate the main room as you like. The Lodestone is also only there in case you want to bind a compass to it, and is 100% not needed

I built my nice and easy starter base for any survival world! Very minimal brass used and all materials are fairly easy to get!