Mechanical Piston Head

Windmill #30daycreatemodchallenge

This windmill is part of the 30 day create mod build challenge. It is also part of my raised city project, where builds in the challenge will stack together to form a city (thats why there are notches in this build). Setup instructions: 1. Right click all the windmill bearings 2. Place water next to the light blue concrete

A Charming little Create Iron Farm - 30 Day Build challenge

Day 2 - Behold, a charming little iron farm! I poured my creativity into making it visually appealing, even if it's not the most efficient. It's designed with an entrance to the iron farm in a mining cave. The water that powers the door flows in two directions, depending on if you open or close it. Instructions for schematic: -Go down the trapdoor and flip all the levers to make sure the rails are on. -Set all the slots in the toolbox to iron nuggets and flint as a filter -Lastly, flip the lever to turn on the iron farm -For placing in Survival you can skip the dirt blocks as i mostly used it to fill in the mountain.

Storage System #30daybuildchallenge

Do you want a storage system with a bunch of features that are actually useful? Do you want a storage system with bulk item capabilities, a terminal, and bulk item inputs and outputs? Then this schematic is for you! Part of the raised tower city project. Setup Instructions: 1. Right Click the windmill bearing on the bottom floor 2. VERY CAREFULLY replace the vaults, you don't want to lost the redstone links 3. On the top level, left 4 depots, put in cobblestone, cobbled deepslate, iron, and an oak log (1 of each) 4. Rename an oak plank to "Currently Unresponsive" and put it in the left depot 5. Put the minecart assembler to "lock rotation" 6. Flick the lever under the minecart assembler

cocoa bean farm #30DayChallenge - otaviothebatata

a cocoa bean farm inside a cocoa bean, to start it just put water in the water wheels and press the lever behind the worm

Simply Complicated Dark Oak Tree Farm

This is my dark oak tree farm I created for my simply complicated tree farms video. Keep in mind that the rotation might change when importing so you have to make sure that you are rotating all the shafts in the same direction as I do otherwise you will get weird behaviors. Check the video to compare my setup with yours. You will also need to add water so that dirt blocks can be turned into grass blocks.

3D Printer

A 3D Printer I made for my "100 things you can do with the create mod" video. Place the schematic as a filter of the deployer and make sure it is supplied with the needed materials. When the deployer moves it will place blocks where you have placed the schematic in the filter.

LunarAntic's Spacious Facility

A huge base with an underground workshop. You're going to have to dig out the dirt when this schematic gets placed underground. Also go for Creative Motors to power everything

30 Day Build Challenge- Starter House- Elemental Paladin

Create Machines inside: Small Bread Maker, Wheat Harvester, Rotating wall (Door to the machinery room), Smoker, Blaster, Haunter, Washer, Manual Powered Basic Machines Notes: You need at least 3 brass funnels because they have filters, other than that you need 0 brass though if you don't want them. The brass is used to make the rotating wall spin and automate the collection of wheat (all it needs is a button press per wheat harvesting). You can also leave out all of the workbenches (and lodestone) and redecorate the main room as you like. The Lodestone is also only there in case you want to bind a compass to it, and is 100% not needed

Rose quartz farm 1.19

A factory that produces 11 rose quartz per hour requires a creative fluid tank in the template, but this can be replaced in survival with a normal tank with the potion of damage and its need a input of quartz, I use in my survival world https://www.schematicannon.com/schematics/10-items-from-cobblestone-machine (uberswe's farm) with the netherquartz output

Advanced Piston Simply Complicated Tree Farm

This is the advanced version of the simply complicated tree farms I made. Keep in mind that the rotation might change when importing so you have to make sure that you are rotating all the shafts in the same direction as I do otherwise you will get weird behaviors. Check the video to compare my setup with yours.

create:mechanical_piston_head

Schematics that use this block: