Lectern Controller

create:lectern_controller

Schematics that use this block:

My First Clockwork Airplane

This was the first fully working airplane that I built using the Create Mod and Create: Clockwork

The Televator #30daycreatemodchallenge

The Televator is like an elevator, but instead of going up and down, it teleports you up. The Televator is one way, and only goes up, to get down just jump down the water. The Televator is just a proof of concept so it is buggy. ***Please Read the Setup Instructions even if your are pasting it in creative mod*** Setup: 1. Provide SU to the creative motor spots (256 RPM NEEDED) 2. Make sure every bearing is set to "Never Place" 3. Make sure the valve handles are set to 1° then turn them 4. Go to the back an ensure the elevator looks like a text cursor (thin in the middle, thick at the top and bottom) You can change the orientation by flicking the levers above the target blocks. 5. Put water at the bottom of the elevator so you don't die (there are dedicated notches for water) 6. On the bottom floor redstone room, flick the lever on then off quickly to start the clock. Troubleshooting: If it doesn't work then right click all the bearings (yes every one of them) when they are in down mode (not in a single file line). Then go through the setup instructions again. You may need to do this multiple times. If Uberswe doesn't describe a few things right I may make a separate video because all this can be confusing.

Storage System #30daybuildchallenge

Do you want a storage system with a bunch of features that are actually useful? Do you want a storage system with bulk item capabilities, a terminal, and bulk item inputs and outputs? Then this schematic is for you! Part of the raised tower city project. Setup Instructions: 1. Right Click the windmill bearing on the bottom floor 2. VERY CAREFULLY replace the vaults, you don't want to lost the redstone links 3. On the top level, left 4 depots, put in cobblestone, cobbled deepslate, iron, and an oak log (1 of each) 4. Rename an oak plank to "Currently Unresponsive" and put it in the left depot 5. Put the minecart assembler to "lock rotation" 6. Flick the lever under the minecart assembler