Schematicannon.com

Cut Diorite

create:cut_diorite

Schematics that use this block:

gallery

House With Elevator - 30 Day Challenge

This is a create mod house that I build which features a working elevator. Feel free to use it as a base! This is part of my 30 day create mod challenge, you can find the modpack here: https://modrinth.com/modpack/create-30-day-build-challenge/moderation
gallery

The Televator #30daycreatemodchallenge

The Televator is like an elevator, but instead of going up and down, it teleports you up. The Televator is one way, and only goes up, to get down just jump down the water. The Televator is just a proof of concept so it is buggy. ***Please Read the Setup Instructions even if your are pasting it in creative mod*** Setup: 1. Provide SU to the creative motor spots (256 RPM NEEDED) 2. Make sure every bearing is set to "Never Place" 3. Make sure the valve handles are set to 1° then turn them 4. Go to the back an ensure the elevator looks like a text cursor (thin in the middle, thick at the top and bottom) You can change the orientation by flicking the levers above the target blocks. 5. Put water at the bottom of the elevator so you don't die (there are dedicated notches for water) 6. On the bottom floor redstone room, flick the lever on then off quickly to start the clock. Troubleshooting: If it doesn't work then right click all the bearings (yes every one of them) when they are in down mode (not in a single file line). Then go through the setup instructions again. You may need to do this multiple times. If Uberswe doesn't describe a few things right I may make a separate video because all this can be confusing.

Categories

Mods