Creative Motor

CocoBeanFarm 30DayChallenge

#30DayChallenge

My First Clockwork Airplane

This was the first fully working airplane that I built using the Create Mod and Create: Clockwork

My Dream Factory - Optimal Variation

Here's my Dream Factory! This is the Optimal Variation discussed in the video. It produces: Cobble, Gravel, Sand, Iron Nuggets, Flint, Soul Sand, Quartz, Diorite, Andesite, Granite, Clay Balls, Clay Block, Terracotta, Red Sand, Gold Nugget, Brick, Nether Brick. Working on producing Andesite Alloy and Brass products next. Video Tutorial Included :) Enjoy :)

30DayChallenge Alloy Farm

#30DayChallenge

[Day 2] Kuha's Create: 30 Day Building Challenge - Iron Farm

Day 2 of the challenge, now with an Iron Farm! Not really a fan of the build tho

30 Day Build Challenge- Bread Factory- Elemental Paladin

An automatic factory that harvests wheat and makes bread. It also makes bone meal as a side product. To get the farm running, you have to go to the back and climb up the ladder to get into the production floor. At the opposite side of the factory from the door is a button that you need to press, and it will start a 10 minute timer before the gantry moves, and then the carriage should move every 20 minutes (You can always adjust these times to whatever you want though), as long as the gantry is stopped moving by the time both of them have gone off). To get bread from the factory, just press the stone button at the front and it will drop off almost a stack of bread. It drops the bread in a burst of 3, so it only dispenses 63 instead of 64.

Wizard Tower Iron Farm #30daybuildchallenge

Part of the 30 day build challenge series. This iron farm is decently fast and does around 2.5k ingots/hour. How to setup: 1. On top of the red concrete blocks place lava 2. On top of the blue concrete blocks place water 3. Waterlog the leaves 4. Waterlog the stairs on top of the cobble gens 5. Provide power at the lowest clutch near the stairs (inside cube) (Reposted because the last schematic was broken) I tried some new things this time, including using stairs for texturing, a new roof design (for the tower), and my first time ever using a "pallet", and (I have no idea how i've never done this before) an item indicator (shows the fill level of containers). This iron farm is pretty configurable and has can turn itself on and off as needed, it also features a display panel that shows iron farm information. You can also remotely force shutdown parts of the farm if needed. Shaders: Complementary Reimagined, Rethinking Voxels (hopefully I don't mess it up this time)

Clockwork Balloon

This was a balloon I made with VS Clockwork and the Create Mod

Create Mod Starter House

This is a Create Mod starter house which is perfect to use as a nice base for your world. It is something I never used in a video so I am sharing it here for anyone to use but please give credit.

The Televator #30daycreatemodchallenge

The Televator is like an elevator, but instead of going up and down, it teleports you up. The Televator is one way, and only goes up, to get down just jump down the water. The Televator is just a proof of concept so it is buggy. ***Please Read the Setup Instructions even if your are pasting it in creative mod*** Setup: 1. Provide SU to the creative motor spots (256 RPM NEEDED) 2. Make sure every bearing is set to "Never Place" 3. Make sure the valve handles are set to 1° then turn them 4. Go to the back an ensure the elevator looks like a text cursor (thin in the middle, thick at the top and bottom) You can change the orientation by flicking the levers above the target blocks. 5. Put water at the bottom of the elevator so you don't die (there are dedicated notches for water) 6. On the bottom floor redstone room, flick the lever on then off quickly to start the clock. Troubleshooting: If it doesn't work then right click all the bearings (yes every one of them) when they are in down mode (not in a single file line). Then go through the setup instructions again. You may need to do this multiple times. If Uberswe doesn't describe a few things right I may make a separate video because all this can be confusing.

Storage System #30daybuildchallenge

Do you want a storage system with a bunch of features that are actually useful? Do you want a storage system with bulk item capabilities, a terminal, and bulk item inputs and outputs? Then this schematic is for you! Part of the raised tower city project. Setup Instructions: 1. Right Click the windmill bearing on the bottom floor 2. VERY CAREFULLY replace the vaults, you don't want to lost the redstone links 3. On the top level, left 4 depots, put in cobblestone, cobbled deepslate, iron, and an oak log (1 of each) 4. Rename an oak plank to "Currently Unresponsive" and put it in the left depot 5. Put the minecart assembler to "lock rotation" 6. Flick the lever under the minecart assembler

Simply Complicated Dark Oak Tree Farm

This is my dark oak tree farm I created for my simply complicated tree farms video. Keep in mind that the rotation might change when importing so you have to make sure that you are rotating all the shafts in the same direction as I do otherwise you will get weird behaviors. Check the video to compare my setup with yours. You will also need to add water so that dirt blocks can be turned into grass blocks.

Advanced Rotating Simply Complicated Tree Farm

This is the advanced version of the simply complicated tree farms I made. Keep in mind that the rotation might change when importing so you have to make sure that you are rotating all the shafts in the same direction as I do otherwise you will get weird behaviors. Check the video to compare my setup with yours. Guybrush had the original idea for this farm, make sure to subscribe to him on YouTube! https://www.youtube.com/@aRandomDudeDRS

Create Train Assembler, Disassembler and elevator.

This is a system that is able to first of all disassemble a train, then lift it up and move it to a different track, before reassembling it. This schematic includes two parts, the crane itself, and the Redstone control circuit. While you can use the gantry crane schematic, it is recommended that you instead build it to fit your situation. Basic changes are as such, changing the height should require adjustments to the Blue, red and purple circuits. Increasing the timing for all of these. Changes to the width should change the gantry settings, which is the black and white concrete sections in the timings.

30daychallenge StorageSystem

#30dayChallenge 30daychallenge Storage house that has some items sorting and ingot compacting to blocks

3D Printer

A 3D Printer I made for my "100 things you can do with the create mod" video. Place the schematic as a filter of the deployer and make sure it is supplied with the needed materials. When the deployer moves it will place blocks where you have placed the schematic in the filter.

My Dream Factory - Base Variation

Here's my Dream Factory! This is the Base Variation discussed in the video. It produces: Cobble, Gravel, Sand, Iron Nuggets, Flint, Soul Sand, Quartz, Diorite, Andesite, Granite, Clay Balls, Clay Block, Terracotta, Red Sand, Gold Nugget, Brick, Nether Brick. Working on producing Andesite Alloy and Brass products next. Video Tutorial Included :) Enjoy :)

4 Track Train Station

This was done as a commission for me by a builder name Everlipse. It features 4 different tracks where trains can enter and leave to pickup goods and passengers. There is no functionality for loading or unloading goods, it is only decorative.

[Day 3] - Create: 30 Day Building Challenge - Train Station

Full Video: https://youtu.be/jFqWbS4ONJ4 Day 3 of the Create: 30 Day Building Challenge, today, that's the train station we're doing!

Airship by Migz

This was an Airship from one of my sponsored videos. I hired a builder called Migz on Fiverr to build this using only the base Create mod.

create:creative_motor

Schematics that use this block: