Clutch

Storage System - 30 Day Challenge

This is a storage system that uses a lot of brass funnels and belts to sort items along with chests for storage. Everything is powered using a single water wheel.

My First Clockwork Airplane

This was the first fully working airplane that I built using the Create Mod and Create: Clockwork

Uberswe's Farwater Workshop

This is the workshop I build on Farwater Interstellar (Season 9)

My Dream Factory - Optimal Variation

Here's my Dream Factory! This is the Optimal Variation discussed in the video. It produces: Cobble, Gravel, Sand, Iron Nuggets, Flint, Soul Sand, Quartz, Diorite, Andesite, Granite, Clay Balls, Clay Block, Terracotta, Red Sand, Gold Nugget, Brick, Nether Brick. Working on producing Andesite Alloy and Brass products next. Video Tutorial Included :) Enjoy :)

Honey and Sugar Farm

Adapted Honey farm for Sugar output as well Next steps would be to turn it into a half sugar half honey comb farm. Inspired by megaladam's design

30DayChallenge Alloy Farm

#30DayChallenge

Windmill #30daycreatemodchallenge

This windmill is part of the 30 day create mod build challenge. It is also part of my raised city project, where builds in the challenge will stack together to form a city (thats why there are notches in this build). Setup instructions: 1. Right click all the windmill bearings 2. Place water next to the light blue concrete

Cobble generator only create v3 1.16.5

It's a simple build, you need a minimal brass for building a part of item. All other ressources can be obtain easlier and in low start game.

Wizard Tower Iron Farm #30daybuildchallenge

Part of the 30 day build challenge series. This iron farm is decently fast and does around 2.5k ingots/hour. How to setup: 1. On top of the red concrete blocks place lava 2. On top of the blue concrete blocks place water 3. Waterlog the leaves 4. Waterlog the stairs on top of the cobble gens 5. Provide power at the lowest clutch near the stairs (inside cube) (Reposted because the last schematic was broken) I tried some new things this time, including using stairs for texturing, a new roof design (for the tower), and my first time ever using a "pallet", and (I have no idea how i've never done this before) an item indicator (shows the fill level of containers). This iron farm is pretty configurable and has can turn itself on and off as needed, it also features a display panel that shows iron farm information. You can also remotely force shutdown parts of the farm if needed. Shaders: Complementary Reimagined, Rethinking Voxels (hopefully I don't mess it up this time)

Nether Tree Farm

Nether Tree Farm that I designed! Check it out on Youtube for more details!

Nether Lava Factory

This is a room I built for the "100 things you can do with the create mod" video that I made. One side features a train that can load lava and the other side features a bucket refill area that throws buckets through the nether portal.

A Charming little Create Iron Farm - 30 Day Build challenge

Day 2 - Behold, a charming little iron farm! I poured my creativity into making it visually appealing, even if it's not the most efficient. It's designed with an entrance to the iron farm in a mining cave. The water that powers the door flows in two directions, depending on if you open or close it. Instructions for schematic: -Go down the trapdoor and flip all the levers to make sure the rails are on. -Set all the slots in the toolbox to iron nuggets and flint as a filter -Lastly, flip the lever to turn on the iron farm -For placing in Survival you can skip the dirt blocks as i mostly used it to fill in the mountain.

Skeej_inc iron farm

Iron Farm from SKeej incs yt video

Bee Inc. Honey Farm

This was a honey farm that I created on my Create mod SMP originally called "Tech Server" and later referred to as "Cogs & Trains SMP". It produces both honey and honey combs automatically and features a honey fall in the middle. Trains can pick up both honey and honey combs at the bottom.

Storage System #30daybuildchallenge

Do you want a storage system with a bunch of features that are actually useful? Do you want a storage system with bulk item capabilities, a terminal, and bulk item inputs and outputs? Then this schematic is for you! Part of the raised tower city project. Setup Instructions: 1. Right Click the windmill bearing on the bottom floor 2. VERY CAREFULLY replace the vaults, you don't want to lost the redstone links 3. On the top level, left 4 depots, put in cobblestone, cobbled deepslate, iron, and an oak log (1 of each) 4. Rename an oak plank to "Currently Unresponsive" and put it in the left depot 5. Put the minecart assembler to "lock rotation" 6. Flick the lever under the minecart assembler

Iron Factory - 30 Day Challenge

This is an iron factory I built as part of my 30 day create mod build challenge. You will need to waterlog the drills, add water in front of the encased fan, waterlog the stairs near the steam engines and put water down by the water wheel. You also need lava over the drills at the top.

Andesite Alloy Farm

Compact Andesite Alloy Farm. Requires 17.408 SU at 256 RPM. Can run at any speeed greater than 30 RPM. Makes 4K Andesite Alloy per Hour at 256 RPM. 12x7 Blocks in size.

Quad Casing Creator

This is my Casing Crafting Device, made to automatically craft each of the 4 different casing types. Crafting these by hand can quickly become a chore and a delay to do what you want to do, well, no more. Just set this up and you will be building what you want, when you want.

Elevator for Create 0.5.0 or earlier

This is a simple elevator concept that was useful before the elevator pulley was introduced in 0.5.1

Steam Engine Room (Non-Competition)

Starting off with the first day is of course a steam engine room, how else will we make power for all our factories? Maybe unlike other people doing this challenge, I will be focusing not aesthetics, but instead power (so quantity>quality) although the steam engine room is decorated. (there isn't much to a good steam engine room, so I decorated it this time to make it look a tad bit better) *Note 2: Building output is in the back* How to setup: #1 right click the windmill bearings to turn them on. Notice that when turning both of them on, the stress caps at 100% (perfectly stressed) [the wind turbines are in there own sealed off room] #2 Add water into the infinite water source holes (also inside it's own dedicated sealed off room) #3 add lava above the dripstone cauldrons #4 add buckets onto the top depots of the lava bucket filling setups If you are using this for the competition, use the 25x25_actual schematic (different post) Please use the other post of this if you ARE using this for the competition

create:clutch

Schematics that use this block: