Andesite Scaffolding

create:andesite_scaffolding

Schematics that use this block:

Create Train Assembler, Disassembler and elevator.

This is a system that is able to first of all disassemble a train, then lift it up and move it to a different track, before reassembling it. This schematic includes two parts, the crane itself, and the Redstone control circuit. While you can use the gantry crane schematic, it is recommended that you instead build it to fit your situation. Basic changes are as such, changing the height should require adjustments to the Blue, red and purple circuits. Increasing the timing for all of these. Changes to the width should change the gantry settings, which is the black and white concrete sections in the timings.

Storage System - JcWnnr - 30 day challenge

This is my storage system building made for the Uberswe 30 day challenge. It is in the JcWnnr '23 to '24 style. I left the sorting up to the person using the schematic. The filters are the most complex part of the system and they are not that hard. The sorting is done by the smart chutes. Set the items that will go into the chests directly below the smart chute on the filter. Then on the brass funnel for the chest set the specific item on the brass funnel's filter. You can use the list filter supplied, or just use the built in filter on the brass funnel itself. That's it. The items will fall down and go into the chests. There is an inventory input depot at each corner of the system. Overflow could become an issue if you have many many items for one chest, but a trash system could be added if you wanted. If you wanted to scale up the system you can just add more chests on the corners of the system and add more belts and shafts to expand it out. this system is fit in the 25x25 grid for the 30 day challenge. Hope you have fun!

Create Mod Tree Farm - 30 Day Challenge

This is a beginner friendly Create Mod tree farm that I build as part of my 30 day create mod challenge. You will need to add a waterwheel under the floor of the house to input rotational power into the speed controller.