Andesite Ladder

30 Day Build Challenge- Clock Tower- Elemental Paladin

This clock tower has 5 faces. Why 5, because if you have a flying machine or elytra then you can tell the time by flying over the clock tower. However, there is a small issue with the schematic that I can't figure out why it does this. Whenever you power the clock tower from the base of the structure, it breaks some of the shafts and cogs to run the faces on the North, South, East, and West side. To fix these, make sure the clock tower is running and then place a shaft on each of the lower small cog, then use the built in shaft placer to place 2 shafts and 1 small cog, and then check if the clockface is running. Again, don't know why this is happening, as it even happens in my world if I start and stop the clocktower.

Passager Car End

A copycat train Passager Car End for you to change blank copycat panels and make you're own train design from it, Here's the list of Mods used for this schematic: Create Create: Steam 'n' Rails Create Deco Create: Copycats+ Create: Bells & Whistles if used in videos please give credit to me (SeanieMac99) Made By SeanieMac99

[Day 4] - Create: 30 Day Building Challenge - Bread Factory

Full Video: https://youtu.be/jFqWbS4ONJ4 Day 4 of the Create: 30 Day Building Challenge, today, we're working on the bread factory with a friend of mine!

Windmill #30daycreatemodchallenge

This windmill is part of the 30 day create mod build challenge. It is also part of my raised city project, where builds in the challenge will stack together to form a city (thats why there are notches in this build). Setup instructions: 1. Right click all the windmill bearings 2. Place water next to the light blue concrete

Lava Train

A create mod lava train which looks great and is perfect for transporting lava between two points. This was a build made by BlasTG for use in a future video which I ended up not making.

Decka's 30 Day Challenge Starter House

house :) i made for 30 Day Challenge

A Charming little Create Iron Farm - 30 Day Build challenge

Day 2 - Behold, a charming little iron farm! I poured my creativity into making it visually appealing, even if it's not the most efficient. It's designed with an entrance to the iron farm in a mining cave. The water that powers the door flows in two directions, depending on if you open or close it. Instructions for schematic: -Go down the trapdoor and flip all the levers to make sure the rails are on. -Set all the slots in the toolbox to iron nuggets and flint as a filter -Lastly, flip the lever to turn on the iron farm -For placing in Survival you can skip the dirt blocks as i mostly used it to fill in the mountain.

Train Station - JcWnnr - 30 day challenge

My Trainstation for the Uberswe 30 day challenge. It is built in the JcWnnr '23 to '24 style. It comes with automatic doors that open and close as the sun comes up and goes down as well as automatic lights. There are alternate ways to get to the tracks when the station is closed. There is also a perfectly integrated sign that has all shafts and gears hidden. You can have it say whatever you like! Enjoy!

Storage System #30daybuildchallenge

Do you want a storage system with a bunch of features that are actually useful? Do you want a storage system with bulk item capabilities, a terminal, and bulk item inputs and outputs? Then this schematic is for you! Part of the raised tower city project. Setup Instructions: 1. Right Click the windmill bearing on the bottom floor 2. VERY CAREFULLY replace the vaults, you don't want to lost the redstone links 3. On the top level, left 4 depots, put in cobblestone, cobbled deepslate, iron, and an oak log (1 of each) 4. Rename an oak plank to "Currently Unresponsive" and put it in the left depot 5. Put the minecart assembler to "lock rotation" 6. Flick the lever under the minecart assembler

Lighthouse

This is a Create Mod Lighthouse I built on my community SMP. It features a rotating light at the top, a large spinning wheel in the middle and a moving crane. You will need to add water to the water wheels to power the different areas. See my videos on where to click to make things move.

Starter House - 30 Day Challenge

This is a starter house I built for my 30 day Create mod build challenge. This house uses very basic materials to make it more accessible and avoids any use of brass to make it more beginner friendly. It only uses Create, no other mods are needed.

Copycat Passager Car

A copycat train carraige for you to change blank copycat panels and make you're own train design from it, Here's the list of Mods used for this schematic: Create Create: Steam 'n' Rails Create Deco Create: Copycats+ Create: Bells & Whistles if used in videos please give credit to me (SeanieMac99) Made By SeanieMac99

The Grand Tour

I built this train for a tour of my Create Mod Server where I traveled over 10000 blocks by train.

Windmill - 30 Day Build Challenge

This is a Create Mod windmill that I build as part of my 30 day create mod build challenge. It only uses Create, no other mods are required. It also produces bread if the lever at the top of the farm is activated. Modpack: https://modrinth.com/modpack/create-30-day-build-challenge/moderation

Airship by Migz

This was an Airship from one of my sponsored videos. I hired a builder called Migz on Fiverr to build this using only the base Create mod.

30 Day Build challenge - A nice Windmill, storage and elevator design :D

This is day 3,4 and 5 of the 30 day build challenge! I decided to build a Windmill design with a storage system and elevator inside. The storage system fully works without any need to be powered. You can add filters to the funnels for the items to be sorted. Right click both the windmill bearing and elevator pulley with an empty hand to activate. Hope you like it! :D

Storage System - JcWnnr - 30 day challenge

This is my storage system building made for the Uberswe 30 day challenge. It is in the JcWnnr '23 to '24 style. I left the sorting up to the person using the schematic. The filters are the most complex part of the system and they are not that hard. The sorting is done by the smart chutes. Set the items that will go into the chests directly below the smart chute on the filter. Then on the brass funnel for the chest set the specific item on the brass funnel's filter. You can use the list filter supplied, or just use the built in filter on the brass funnel itself. That's it. The items will fall down and go into the chests. There is an inventory input depot at each corner of the system. Overflow could become an issue if you have many many items for one chest, but a trash system could be added if you wanted. If you wanted to scale up the system you can just add more chests on the corners of the system and add more belts and shafts to expand it out. this system is fit in the 25x25 grid for the 30 day challenge. Hope you have fun!

30 Day Build Challenge- Starter House- Elemental Paladin

Create Machines inside: Small Bread Maker, Wheat Harvester, Rotating wall (Door to the machinery room), Smoker, Blaster, Haunter, Washer, Manual Powered Basic Machines Notes: You need at least 3 brass funnels because they have filters, other than that you need 0 brass though if you don't want them. The brass is used to make the rotating wall spin and automate the collection of wheat (all it needs is a button press per wheat harvesting). You can also leave out all of the workbenches (and lodestone) and redecorate the main room as you like. The Lodestone is also only there in case you want to bind a compass to it, and is 100% not needed

Copycat Loco and Tender

A copycat train for you to change blank copycat panels and make you're own train design from it, Use the bollers from Steam 'n' Rails to fill in the big gap on the Loco Here's the list of Mods used for this schematic: Create Create: Steam 'n' Rails Create Deco Create: Copycats+ Create: Bells & Whistles if used in videos please give credit to me (SeanieMac99) Made By SeanieMac99

create:andesite_ladder

Schematics that use this block: