Andesite Door

Storage System - 30 Day Challenge

This is a storage system that uses a lot of brass funnels and belts to sort items along with chests for storage. Everything is powered using a single water wheel.

30 Day Build Challenge- Clock Tower- Elemental Paladin

This clock tower has 5 faces. Why 5, because if you have a flying machine or elytra then you can tell the time by flying over the clock tower. However, there is a small issue with the schematic that I can't figure out why it does this. Whenever you power the clock tower from the base of the structure, it breaks some of the shafts and cogs to run the faces on the North, South, East, and West side. To fix these, make sure the clock tower is running and then place a shaft on each of the lower small cog, then use the built in shaft placer to place 2 shafts and 1 small cog, and then check if the clockface is running. Again, don't know why this is happening, as it even happens in my world if I start and stop the clocktower.

Ice Factory

This is an Ice Factory I created. It generates about 2000 ice per hour. When the schematic has been imported you will need to place water to power 2 water wheels. There are also stairs in the farm that all need to be waterlogged. The farm needs a player to be nearby to spawn ice and needs to be supplied with silk touched pickaxes to work. There are two valves set to turn 45 degrees, these can be right clicked to get the roof into it's slanted position as a contraption. The mechanical bearing should be set to only place blocks in it's starting position.

Kuha's Create: 30 Day Building Challenge - Starter House

First day of the 30 day building challenge, today with the starter house!

Passager Car End

A copycat train Passager Car End for you to change blank copycat panels and make you're own train design from it, Here's the list of Mods used for this schematic: Create Create: Steam 'n' Rails Create Deco Create: Copycats+ Create: Bells & Whistles if used in videos please give credit to me (SeanieMac99) Made By SeanieMac99

Spruce Passenger Train

This was a train built by Everlipse for a video which I never got around to making so I am now sharing the train here.

TrainFactory + Trainstation #30daycreatemodchallenge

This is a 35x35 Tainfactory that can produce train tracks and sturdy sheets. the train-tracks are completely automated but the sturdy sheets aren't, u need to put magma blocks in a chest made fir them because its not possible to automate magma blocks with create BUT if you downloaded an addon for that u can still hook up your 2 farms thanks to the train track going thru the factory. Those traintracks going thru can be used for a lot of thingy like just using it as a station or use it to deposit materials and take materials at the farm with automated trains (highly recommend that). I also tryed to make the inside look good. so enjoy :D

otavio's golden factory #30DayChallenge

this is an survival friendly golden factory, to start it you must enter the power room (located at the left side of the building) and water log the three mechanical pumps and the water wheel, put water in the first fan, lava in the second fan and water in the last one. as an brazilian newbie builder i'm very proud of this building.

Simple Two Storey Farm

A fully self powered crop farm capable of producing a good output.

Andesite Passenger Train

This was a train that Everlipse created for me to use in a video but I ended up not using it so now it's shared here for free.

[Day 6] - Create: 30 Day Building Challenge - Storage System

Full Video: https://youtu.be/nqwRbh_Z86c Day 5 of the Create: 30 Day Building Challenge, today, I'm building a storage System

Train 5 blocks wide

Train made for create steam'n rails mod

Create Train Assembler, Disassembler and elevator.

This is a system that is able to first of all disassemble a train, then lift it up and move it to a different track, before reassembling it. This schematic includes two parts, the crane itself, and the Redstone control circuit. While you can use the gantry crane schematic, it is recommended that you instead build it to fit your situation. Basic changes are as such, changing the height should require adjustments to the Blue, red and purple circuits. Increasing the timing for all of these. Changes to the width should change the gantry settings, which is the black and white concrete sections in the timings.

otavio's clock tower #30DayChallenge

I built this clock tower inspired by Big Ben, the tower has an elevetor located on the last floor, inside the clock, the only thing you need to do is water log the mechanical pump just like de photo, it has 5 floors (including the clock part) and you can do anything with the other floors. this building is survival friendly

Copycat Passager Car

A copycat train carraige for you to change blank copycat panels and make you're own train design from it, Here's the list of Mods used for this schematic: Create Create: Steam 'n' Rails Create Deco Create: Copycats+ Create: Bells & Whistles if used in videos please give credit to me (SeanieMac99) Made By SeanieMac99

Beginner Elevator

This is a beginner elevator I made in Uberswe labs, the entire room shown in the video is included as an example to learn from.

30 day build challenge Iron farm and Elevator

30 day build challenge made and iron farm with elevator as well as an elevator to use to get down to your mine levels for more resources!

create:andesite_door

Schematics that use this block: